Mill Details

Hunter Grist Mill

Kings Co. | Nova Scotia | Canada
Known Dates: Early to mid 1800's
Township: n/a
Watersource: Gaspereau River.
Location / Directions

Hunter Grist Mill

From Main Street in the town of Wolfville, go south on Gaspereau Ave. to Old Mill Road on the right, (about 1-2 miles). Turn onto Old Mill Road. Where the road makes a sharp turn, the mill will be sitting, only a few hundred yards, on the southwest side of the road, about 100-200 feet off the road.




View Larger Map
Hunter Grist Mill
Robert T. Kinsey 10/06/2011

It is believed this mill was built in the early to mid 1800's. In 1875 it was purchased by George Hunter.

Hunter Grist Mill
Robert T. Kinsey 10/06/2011

The Hunter family operated the turbine-powered mill until 1927.

Hunter Grist Mill
Robert T. Kinsey 10/06/2011

The frame mill is a sturdier structure than the outward appearances dictate. This fact can be seen in photo #5 elow.

Hunter Grist Mill
Robert T. Kinsey 10/06/2011

Millstone used for a entrance block at the side entrace to the grist mill.

Hunter Grist Mill
Robert T. Kinsey 10/06/2011

This section of the mill may have been log coverewd in siding or simply rough-cur boards covered with siding. Not having seen it personally, it is hard to tell. The unusual brace post holds up some very hefty beams.

Hunter Grist Mill
Robert T. Kinsey 10/06/2011

The main operating gears of the mill, one shaft of which comes off the turbine, and meshes with the other gearing to distribute the power to other parts of the mill.

Hunter Grist Mill
Robert T. Kinsey 10/06/2011

Stairs going up to the second floor from the ground floor.

Hunter Grist Mill

This large wooden-toothed drum-shaped gear might be just that, a drumgear.

Hunter Grist Mill
Robert T. Kinsey 10/06/2011

A millstone set, complete with its cover is buried under mill debris.

Hunter Grist Mill
Robert T. Kinsey 10/06/2011

Here, a frame or shroud for a run of stones is tipped up amid other detritous that accumulates in an unused old building.

Hunter Grist Mill
Robert T. Kinsey 10/06/2011

This pully in the attic near the peak, might be part of a pully system used to hoist grain and feed sacks to various levels of the mill. These could be for hoisting up the outside end of the mill or even internally, however arranged.

Hunter Grist Mill
Robert T. Kinsey 10/06/2011

Unknown piece of machinery, perhaps a corncob grinder.

Hunter Grist Mill
Robert T. Kinsey 10/06/2011

*Update: The machine pictured is a "smutter" or "smut machine". It removes smut, dirt, fungus, small seeds, straw, chaff, manure, and rodent droppings that might be mixed with the grain, prior to milling the grain. Ted Hazen 01/22/2012*

Hunter Grist Mill
Robert T. Kinsey 10/06/2011

Poster in the mill states: George Hunter Will Card Wool at the reviewed price of Four Cents per lb. GRINDING will be done with care at shortest notice as usual. Thankful for past favours, respectfully ask a continuence of Patronage. Owing to delays and losse in collecting small debts, he feels obliged to adopt the CASH, or at least "Pay Some Upon" system in his future business transactions. ALSO Requires immediate payment of all outstanding debts. March 1883.

Hunter Grist Mill
Robert T. Kinsey 10/06/2011

GPS: N 45.067550, W -64.35551

 
Upload Pictures
I want to upload picture(s) at this time.