Humbert Mill / Maun Mill / McConnellsburg Roller Mills-ruins
Fulton Co. | Pennsylvania | USA | Mid 1800's
Township: Ayr Twp.
Watersource: Big Cove Creek.


Official Website | Directions


Pictures by: Robert T. Kinsey    01/17/2009 -  This mill was built by Frederick Humbert, Sr. sometime in the mid 1800's.
Picture: Robert T. Kinsey 01/17/2009
This mill was built by Frederick Humbert, Sr. sometime in the mid 1800's.


Pictures by: Robert T. Kinsey    01/17/2009 -  Part of the one rear side and the rear end wall have collapsed, as has also the roof, letting the mill succumb to the elements.
Picture: Robert T. Kinsey 01/17/2009
Part of the one rear side and the rear end wall have collapsed, as has also the roof, letting the mill succumb to the elements.


Pictures by: Robert T. Kinsey    01/17/2009 -  A slightly different angle on the wall breakdown
Picture: Robert T. Kinsey 01/17/2009
A slightly different angle on the wall breakdown


Pictures by: Robert T. Kinsey    01/17/2009 -  Closeup of the run of stones on the second floor, seemingly pushed toward one side of the massive timbers of the hurst frame that supported it during operation.
Picture: Robert T. Kinsey 01/17/2009
Closeup of the run of stones on the second floor, seemingly pushed toward one side of the massive timbers of the hurst frame that supported it during operation.


Pictures by: Robert T. Kinsey    01/17/2009 -  Some main wooden shafting with a large wooden gear with replaceable wooden teeth.  Not really in the exact position in which it was during operation, it has shifted with the collapse of the end/corner wall and second floor beams.
Picture: Robert T. Kinsey 01/17/2009
Some main wooden shafting with a large wooden gear with replaceable wooden teeth. Not really in the exact position in which it was during operation, it has shifted with the collapse of the end/corner wall and second floor beams.


Pictures by: Robert T. Kinsey    01/17/2009 -  Some more large gearing, with also replacable wooden teeth on one side of the union with which the gear would have meshed with the steel horzontal gear on the vertical shaft.
Picture: Robert T. Kinsey 01/17/2009
Some more large gearing, with also replacable wooden teeth on one side of the union with which the gear would have meshed with the steel horzontal gear on the vertical shaft.


Pictures by: Robert T. Kinsey    01/17/2009 -  A view under the nether (lower) stone showing the steel shaft going up through the center of the grindstone.
Picture: Robert T. Kinsey 01/17/2009
A view under the nether (lower) stone showing the steel shaft going up through the center of the grindstone.


Pictures by: Robert T. Kinsey    01/17/2009 -  Another view of the ruins depicting more line shafts, gears, support timbers that were mortised and tenioned together, then wooden pegged.
Picture: Robert T. Kinsey 01/17/2009
Another view of the ruins depicting more line shafts, gears, support timbers that were mortised and tenioned together, then wooden pegged.


Pictures by: Robert T. Kinsey    01/17/2009 -  A second mill stone can be seen just above and left of the window opening of the leaning out portion of the stone wall.  Just goes to show how important a good roof is to keeping the integrity of the whole structure.
Picture: Robert T. Kinsey 01/17/2009
A second mill stone can be seen just above and left of the window opening of the leaning out portion of the stone wall. Just goes to show how important a good roof is to keeping the integrity of the whole structure.


Pictures by: Robert T. Kinsey    01/17/2009 -  The front of the mill, still the best preserved part, perhaps because of its position to the weather or because it did not contain the heaviest weight and vibration of the operating mechanisms.
Picture: Robert T. Kinsey 01/17/2009
The front of the mill, still the best preserved part, perhaps because of its position to the weather or because it did not contain the heaviest weight and vibration of the operating mechanisms.


Pictures by: Robert T. Kinsey    01/17/2009 -  The mill was also known as the McConnellsburg Roller Mills and was a
Picture: Robert T. Kinsey 01/17/2009
The mill was also known as the McConnellsburg Roller Mills and was a "Manufacturer of and Dealer in Flour and Feed." David S. Maun was listed as one proprietor. By 1916, C. Maun lived next to the mill and was probably the operator. The present owner continues to call the mill "the Maun Mill".


Pictures by: Vintage photo    c. 1900   submitted  07/19/2010 - Caroline Maun -  *Update:  David S. Maun was my great grandfather. Conrad Maun was his brother. John Calvin Maun, David S. Maun's son, inherited and ran the mill after David S. Maun.  I'm not sure exactly when it closed operations.  The Reeders are the current owners of the old mill ruins.  Caroline Maun  07/19/2010*
Picture: Vintage photo c. 1900 submitted 07/19/2010 - Caroline Maun
*Update: David S. Maun was my great grandfather. Conrad Maun was his brother. John Calvin Maun, David S. Maun's son, inherited and ran the mill after David S. Maun. I'm not sure exactly when it closed operations. The Reeders are the current owners of the old mill ruins. Caroline Maun 07/19/2010*




"God's Spirit doesn't make us slaves who are afraid of him. Instead, we become his children and call him our Father."
Romans 8:15 CEV

Supply Update Information

 

Directions:
These mill ruins sit back off the east side of US 522 about 0.5 miles south of McConnellsburg on Cove Creek.
   
 
website by: About Web Design